Operation Manual

Name Description
The default password is admin. You must change
the default password.
Confirm Password Specifies the administrator password for
confirmation.
Related links
Administering through the Web GUI on page 19
Configuring the upgrade and provisioning settings
About this task
Use the following procedure to upgrade the firmware of the deskphone. During the upgrade, if the
deskphone receives a call, the deskphone starts ringing. If the user does not answer the call, the
deskphone continues to ring till the upgrade completes. Therefore, you must plan the upgrade
during the off hours.
Procedure
1. Click Maintenance > Upgrade and Provisioning.
The system displays the Upgrade and Provisioning page.
2. Enter the required details for each field.
3. Click Save.
4. Click Reboot at the upper-right corner of the page for the changes to take effect.
Related links
Administering through the Web GUI on page 19
Upgrading and provisioning settings field descriptions
Name
Description
Firmware Upgrade and Provisioning Specifies whether the deskphone checks and installs
a new firmware every time the deskphone boots up:
The options are:
• Always Check for New Firmware: The
deskphone always checks for a new firmware.
• Check New Firmware Only When F/W pre/suffix
Changes: The deskphone always checks for a
change in the prefix or suffix of the firmware file.
Table continues…
Maintaining the deskphone
January 2016 Administering Avaya E129 SIP Deskphone 43
Comments on this document? [e-mail]