Operation Manual

Parameter Default value Description
P133 1 Specifies the jitter buffer type. Assign any of the following values:
• 0: Fixed
• 1: Adaptive
P132 2 Specifies the jitter buffer length. Assign any of the following values:
• 0:100ms
• 1: 200ms
• 2: 300ms
• 3: 400ms
• 4: 500ms
• 5: 600ms
• 6: 700ms
• 7: 800ms
Related links
Administering through the configuration file on page 56
Call settings parameters
Parameter
Default value Description
P29 0 Specifies whether to enable early dial. Assign any of the following values:
• 0: No
• 1: Yes. In this case, the SIP proxy must support must support 484
response.
P66 Specifies the dial plan prefix, that is, the prefix that the deskphone adds to
the number that you dial.
P290 { x+ | *x+ |
*xx*x+ }
Specifies the dial plan for the phone. The dial plan establishes the
expected number and pattern of digits for a telephone number. You can
use the following rules to establish the dial plan:
• Accepted digits and characters: 0 to 9, *, #, A to D, a to d.
• x: Represents any digit from 0 to 9.
• xx+: Represents at least a 2 digit number.
• ^: Excludes the following digits or characters.
• [x-y]- Includes any digit from the range x to y.
• <x=yz>: Replaces digit x with digits y and z when dialing.
• |: Represents the Or operation.
Table continues…
Call settings parameters
January 2016 Administering Avaya E129 SIP Deskphone 67
Comments on this document? [e-mail]