Operation Manual

Basic network settings parameters
Parameter Default value Description
P1415 0 Specifies Internet Protocol that the deskphone uses. Assign any of the
following values:
• 0: IPv4
• 1: IPv6
P8 0 Specifies the method for the phone to obtain the IPv4 address. Assign any
of the following values:
• 0: DHCP. You must also specify the parameters P146 and P148.
• 1: Static. You must also specify the parameters P9, P10, P11, P12, P13,
P14, P15, P16, P17, P18, P19, P20, P21, P22, P23, P24, P25, P26, P27,
P28, P92, P93, P94, P95, P1419, P1424, P1425, P1423, P1426, P1420,
P1421, and P1422.
• 2: PPPoE. You must also specify the parameters P82, P83, and P269.
P146 Specifies the name of the client. This field is optional but some Internet
Service Providers might require it. The maximum length is 64 characters.
P148 Specifies vendor class ID that client and servers exchange. The maximum
length is 64 characters.
P82 Specifies the PPPoE account ID.
P83 Specifies the PPPoE password. Must not contain an apostrophe (‘) or a
quote (“).
P269 Specifies the PPPoE service name.
P9 Specifies the first octet of the IP address. Assign any value in the range of
0 to 255.
P10 Specifies the second octet of the IP address. Assign any value in the range
of 0 to 255.
P11 Specifies the third octet of the IP address. Assign any value in the range of
0 to 255.
P12 Specifies the fourth octet of the IP address. Assign any value in the range
of 0 to 255.
P13 Specifies the first octet of the subnet mask. Assign any value in the range
of 0 to 255.
P14 Specifies the second octet of the subnet mask. Assign any value in the
range of 0 to 255.
P15 Specifies the third octet of the subnet mask. Assign any value in the range
of 0 to 255.
P16 Specifies the fourth octet of the subnet mask. Assign any value in the
range of 0 to 255.
Table continues…
Basic network settings parameters
January 2016 Administering Avaya E129 SIP Deskphone 71
Comments on this document? [e-mail]