Operation Manual

Parameter Default value Description
P1426 Specifies the IPv6 address type. Assign any of the following values:
• 0: Full static. You must also specify the parameters P1420 and P1421.
• 1: Prefix static. You must also specify the parameter P1422
P1420 Specifies the static IPv6 address.
P1421 Specifies the IPv6 prefix length.
P1422 Specifies the IPv6 prefix.
Related links
Administering through the configuration file on page 56
Advanced network settings parameters
Parameter Default value Description
P7901 0 Specifies whether to enable the 802.1X mode. Assign any of the following
values:
• 0: Disable
• 1: EAP-MD5
P7902 Specifies the identity for the 802.1X mode. The maximum length is 64
characters.
P7903 Specifies the MD5 password. The maximum length is 64 characters.
P1552 Specifies the HTTP proxy URL where the deskphone sends the packets.
The proxy server is an intermediary to route the packets to the destination.
P1553 Specifies the HTTPS proxy URL where the dseskphone sends the packets.
The proxy server is an intermediary to route the packets to the destination.
P38 12 Specifies the Layer 3 QoS parameter. This value is used for IP
Precedence, Diff-Serv, or MPLS. Assign any value in the range of 0 to 63.
P51 0 Specifies the VLAN tag of the Layer 2 QoS packets. Assign any value in
the range of 0 to 4094.
P87 0 Specifies the priority value of the Layer 2 QoS packets. Assign any value in
the range of 0 to 7.
P1348 0 Specifies the PC port mode. Assign any of the following values:
• 0: Enable
• 1: Disabled
• 2: Mirrored
Table continues…
Advanced network settings parameters
January 2016 Administering Avaya E129 SIP Deskphone 73
Comments on this document? [e-mail]