Operation Manual

Parameter Default value Description
P1359 Specifies the password that the deskphone uses to decrypt the encrypted
XML configuration file.
P1360 Specifies the user name to login to the HTTP and HTTPS server.
P1361 Specifies the password to login to the HTTP and HTTPS server.
P212 1 Specifies the firmware upgrade method. Assign any of the following values:
• 0: TFTP
• 1: HTTP
• 2: HTTPS
Note:
If you select HTTPS, you must install CA certificates before the
deskphone upgrade. For more information about installing the CA
certificates, see Installing and Maintaining Avaya E129 SIP
Deskphone.
P192 Specifies the server path for the firmware.
P237 Specifies the prefix for the configuration file. The deskphone downloads the
configuration file only if the encrypted prefix matches the one that you
specified.
P232 Specifies the prefix for the firmware file. The deskphone downloads the
firmware file only if the encrypted prefix matches the one that you
specified.
P233 Specifies the postfix for the firmware file. The deskphone downloads the
configuration file only if the encrypted postfix matches the one that you
specified.
P234 Specifies the prefix for the configuration file. The deskphone downloads the
configuration file only if the encrypted prefix matches the one that you
specified.
P235 Specifies the postfix for configuration file. The deskphone downloads the
configuration file only if the encrypted postfix matches the one that you
specified.
P145 1 Specifies whether the DHCP option 43 and option 66 override the SIP
server. If you enable the DHCP option 66, the system can redirect the
TFTP server. Assign any of the following values:
• 0: No
• 1: Yes
P1411 0 Specifies whether the DHCP option 120 overrides the SIP server. Assign
any of the following values:
• 0: No
• 1: Yes
Table continues…
Deskphone upgrading and provisioning parameters
January 2016 Administering Avaya E129 SIP Deskphone 75
Comments on this document? [e-mail]