Operation Manual

Parameter Default value Description
P194 0 Specifies whether the deskphone checks and installs a new firmware.
Assign any of the following values:
• 0: No
• 1: Yes
P193 10080 Specifies time in minutes when the deskphone checks the HTTP/TFTP
server for a firmware upgrade or configuration file changes. You can assign
any value in the range of 60 to 86400.
P285 1 Specifies the hour of the day when the deskphone checks the HTTP/TFTP
server for a firmware upgrade or configuration file changes. You can assign
any value in the range of 0 to 23.
P286 1 Specifies the day of the week when the deskphone checks the HTTP/TFTP
server for a firmware upgrade or configuration file changes. You can assign
any value in the range of 0 to 6.
P240 0 Specifies whether the deskphone authenticates the configuration file before
accepting the file. Assign any of the following values:
• 0: No
• 1: Yes
Related links
Administering through the configuration file on page 56
Syslog parameters
Parameter
Default value Description
P207 Specifies the URL or IP address of the syslog server. The maximum length
is 64 characters.
P208 0 Specifies the level of syslog logging. Assign any of the following values:
• 0: None
• 1: Debug
• 2: Info
• 3: Warning
• 4: Error
P1387 0 Specifies whether the system includes the SIP log in the syslog messages.
Assign any of the following values:
• 0: No
• 1: Yes
Table continues…
Administering through the configuration file
January 2016 Administering Avaya E129 SIP Deskphone 76
Comments on this document? [e-mail]