Operation Manual

Call features settings parameters
Parameter Default value Description
P71 Specifies the number that the deskphone dials when the deskphone is off-
hook.
P1485 30 Specifies the time in seconds after which the deskphone goes on-hook
after being off-hook. You can specify any value in the range of 10 to 60.
P91 0 Specifies whether to disable the call waiting feature. Assign any of the
following values:
• 0: No
• 1: Yes
P186 0 Specifies whether to disable the call waiting tone when the Call Waiting
feature is active. Assign any of the following values:
• 0: No
• 1: Yes
P184 0 Specifies whether the user can dial an IP address under the same LAN or
VPN segment by entering the last octet in the IP address. Assign any of
the following values:
• 0: No
• 1: Yes
P338 0 Specifies whether the deskphone displays the DTMF digits that the user
enters during a call. Assign any of the following values:
• 0: No
• 1: Yes
P1565 0 Specifies whether to enable the Idle Mute feature. Assign any of the
following values:
• 0: No
• 1: Yes
P1525 Specifies the number that the deskphone dials as DTMF when the user
presses the Transfer button
P1376 0 Specifies whether the deskphone uses the attended transfer by default.
Assign any of the following values:
• 0: No
• 1: Yes
P1406 0 Specifies whether the deskphone replaces # by %23 for some special
situations. Assign any of the following values:
• 0: No
• 1: Yes
Table continues…
Administering through the configuration file
January 2016 Administering Avaya E129 SIP Deskphone 82
Comments on this document? [e-mail]