Operation Manual

Parameter Default value Description
P1561 0 Specifies whether to enable the Click-To-Dial feature. Assign any of the
following values:
• 0: No
• 1: Yes
P1696 0 Specifies whether the deskphone blinks the Message LED for an incoming
call. Assign any of the following values:
• 0: No
• 1: Yes
P1433 300 Specifies the interval in seconds for the deskphone to save the call history
to the flash memory. 0 implies that the option is disabled.
P1434 200 Specifies the number of unsaved logs before the deskphone writes them to
the flash memory. Assign any value in the rage of 0 to 500.
P1311 0 Specifies whether local conferences are enabled.
• 0: Disabled
• 1: Enabled
Related links
Administering through the configuration file on page 56
Ring tone parameters
Parameter
Default value Decsription
P345 Null Specifies frequency and cadence for system ring tone.
Use the following syntax to specify frequencies and cadence for a ring
tone.
f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]; where
• f1 and f2 are frequencies in Hz.
• c is cadence on and off in ms. The system supports up to three
cadences.
For example, f1=440,f2=480,c=200/400;
P343 Null Specifies frequency and cadence for dial tone. Use the syntax as specified
in the parameter P345.
P344 Null Specifies frequency and cadence for message waiting. Use the syntax as
specified in the parameter P345.
P346 Null Specifies frequency and cadence for ring back tone. Use the syntax as
specified in the parameter P345.
Table continues…
Ring tone parameters
January 2016 Administering Avaya E129 SIP Deskphone 83
Comments on this document? [e-mail]