Operation Manual

Parameter Default value Description
P143 1 Specifies whether DHCP Option 2
overrides the time zone settings.
Assign any one of the following
values:
• 0: No
• 1: Yes. Overrides the Time Zone
setting if available.
P246 Specifies the user-defined time
zone. Use the following syntax to
define the time zone:
std offset dst [offset], start [/time],
end [/time]
The default is set to MTZ+6MDT
+5,M4.1.0,M11.1.0 , where
• MTZ+6MDT+5 indicates a time
zone with six hours offset with
one hour ahead of the U.S
central time. Plus (+) indiactes
the local time zone is west of the
Prime Meridian. Minus (-)
indicates the local time zone is
east of the Prime Meridian.
• M4.1.0,M11.1.0 in which the first
number indicates the month,
where 1 corresponds to January,
2 corresponds to February, and
so on. The second number
indicates the nth iteration of the
weekday, where 1 corresponds
to Sunday, 2 corresponds to
Monday, and so on. The third
number indicates weekday,
where 0 corresponds to Sunday,
1 corresponds to Monday, and
so on.
P102
Specifies the date display format
on the LCD. Assign any of the
following values:
• 0: yyyy-mm-dd
• 1: mm-dd-yyyy
• 2: dd-mm-yyyy
• 3: dddd, MMMM dd
Table continues…
Administering through the configuration file
January 2016 Administering Avaya E129 SIP Deskphone 86
Comments on this document? [e-mail]