User's Manual

Version 1.1 SIP4.4 Feature Matrix Page 12

VCC

Voice call



AUTOANSWER via config file

WUK

Wake up key

See Note 11

XMWK

Multiple DN message waiting

Not supported

Note 1: 1100/1200 IP Deskphones are not supported as ACD agents in an Avaya Aura® environment.

Note 2: Another phone’s busy status could be monitored using the presence feature. But currently there

is not a way on the 1100/1200 SIP Deskphone to monitor the forward status of the other phone.

Note 3: Although there isn’t a Display key direct replacement, there are often other ways to see what

number is programmed against a key (e.g. Prefs > Feature Options > Feature Keys > Edit).

Note 4: The 96x1 SIP Deskphones offer the Enhanced Call Forward feature which provides internal call

forwarding; however, this is not available on the 1100/1200 IP Deskphones.

Note 5: Call metering functionality is handled outside of the Avaya Aura® system by a call accounting

application.

Note 6: Although there isn’t an Onsite Notification direct replacement, the Avaya Aura® system

provides Enhanced 911 feature functionality that includes Crisis Alert for Emergency Calls. This

is a feature that notifies the attendant and other designated users when an emergency number is

dialed.

Note 7: The Avaya Aura® system provides the Attendant Intrusion feature which can break into an

existing phone call, but there is nothing similar from the 1100/1200 SIP Deskphone. Additional

call appearances on the 11xx/1200 SIP Deskphone can also receive the second call, allowing

more than one call to appear at a destination.

Note 8: Similar functionality is provided by the Avaya Aura® Property Management System (PMS) and

Attendant Room Status features.

Note 9: Malicious Call Trace requires a MCT Controller to operate, which is a phone with the mct-contr

key programmed. A mct-contr key cannot be configured on an 1100/1200 SIP Deskphone. So

to use this feature, a H.323 phone configured with a mct-contr key is required in the Avaya

Aura® system.

Note 10: Some USR functionality is provided by the Avaya Aura® system Change Coverage feature

(accessed from the 1100/1200 SIP Deskphone via a FAC). The Change Coverage feature allows

phone users to switch between the two call coverage paths defined for their endpoint.

Note 11: Similar functionality is provided by Avaya Aura® Hospitality Messaging Server 400 (HMS

400).