User's Manual

Version 1.1 SIP4.4 Feature Matrix Page 17
8.5 Group Page
The Avaya Aura® feature Group Page is not supported by the 1100/1200 Series SIP4.4 software. 96x1
SIP phones in the page group will open the speaker audio and broadcast the page but the 1100/1200 IP
Deskphones will not.
8.6 Intercom
The Avaya Aura® features Automatic Intercom and Dial Intercom are not supported by the 1100/1200
Series SIP4.4 software. There is currently no direct replacement for the CS 1000 Network Intercom and
Dial Intercom (HOT/DIG) features.
8.7 Auto-Answer
The Avaya Aura® feature Auto Answer is supported on the 1100/1200 SIP phones. It is similar to the
Automatic Answerback (AAK) feature on CS 1000. The following are required setup for the feature:
 In the phone’s device config file, set ENABLE_ANSWER_MODE YES
 Set the phone’s answerback mode for your preference. This is found in menu
Prefs > Feature Options > Answer Mode Settings > Allow Mode
 In SMGR, in the Feature Options screen of the phones’ Endpoint Editor, set Auto Answer to
“all”.
Note that when the Allow Mode is set Disabled, the phone will only use the white list of URLs
configured in menu:
- Prefs > Feature Options > Answer Mode Settings > Allow Addresses
8.8 Non-Ringing Extension
The 1100/1200 IP Deskphones do not support the setting of the extension’s ringing via the parameter
Active Station Ringing in the Endpoint Editor’s Feature Options screen. To create a non-ringing
extension, turn the Alerting volume all the way down in menu:
- Prefs > Audio > Tones > Alerting Volume
8.9 G.722 Codec Support
CM offers four options for codec G722 for wideband audio: G.722-64K, G.722.1-24K, G.722.1-32K, and
G.722.2. However, the 1100/1200 SIP Deskphones only support the G722-64K option.