Wireless Router User Guide

IP Route
220 Avaya Integrated Management Release 4.0.1 Software Update Manager
IP NetMask The IP network mask of the attached net/subnet.
Layer 2 Interface
name
The name of the Layer 2 interface with which this subnet is
associated. Multiple subnets may be associated with a single VLAN,
so multiple IP interfaces may be associated with the same If Name.
Note:
Note: For unnumbered IP interfaces, this field shows only
point-to-point interfaces such as GRE tunnel, Serial
Interface, and Dialer.
Reference Layer 2
Interface Name
An ‘alias’ name for the lower layer interface used to borrow an
unnumbered IP address. To designate the interface as unnumbered,
enter a reference interface name. If the IP address is not unnumbered
this field returns a value of N/A.
Note:
Note: An unnumbered IP interface cannot point to another
unnumbered IP interface.
Type The type of IP address assignment on the interface. Possible values
are:
● Static - The address is assigned by user configuration.
● DHCP/IPCP - The address is assigned remotely by a DHCP
server or IPCP session. The DHCP/IPCP values are read only;
they can be changed in the Dynamic IP Interfaces table (refer to
“Viewing the Dynamic IP Interfaces Table” on page 222
).
Unnumbered - The interface is unnumbered and has no IP address.
Status The status of the IP interface. If checked, the IP interface is enabled.
Oper Status The operational status of the IP interface.
Directed Broadcast When enabled, the router forwards directed broadcasts to an attached
network.
Note:
Note: This field is only available when additional parameters
are selected. To select additional parameters,
click on the Routing Manager Application Toolbar.
Table 70: IP Interface Table Parameters (continued)
Field Description
2 of 3