IP Audio Conference Phone 2033 User Guide BCM 4.
Copyright © Nortel Networks Limited 2005-2006, All rights reserved The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks.
Contents 3 Contents Chapter 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Basic features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Extension microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Telephone controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents N0060623
Chapter 1 Getting Started The IP Audio Conference Phone 2033 brings voice to the audio conference environment by connecting directly to a Local Area Network (LAN) through an Ethernet connection.
Chapter 1 Getting Started Figure 1 shows the IP Audio Conference Phone 2033. Figure 1 IP Audio Conference Phone 2033 Extension microphones The IP Audio Conference Phone 2033 supports up to two extension microphones that extend the microphone range in large rooms. Each extension microphone has a Mute button and an LED indicator to indicate the current mute state. Figure 2 shows an extension microphone.
Chapter 1 Getting Started 7 Telephone controls Use the Volume control buttons to adjust the volume of the ringer and speaker. Use the Mute key on the main unit or any extension speaker to mute the ringer and speaker. The Status indicator LED blinks red when mute is activated. Pressing the Mute key on the extension microphone toggles the mute state of the entire telephone, not just the microphone. Use the Line (DN) key to access the single line and activate on-hook dialing.
Chapter 1 Getting Started Allows you to view the scrollable display menu for feature options (FEATURE *900), including the hot desking feature, do not disturb feature, and call forwarding. For more information on hot desking and other IP feature options, refer to the BCM Telephone Feature User Guide. Note: Feature options in this menu are configured by your system administrator. Press the Services key to exit from any menu or menu item. Indicates voicemail message waiting.
Chapter 1 Getting Started 9 Cleaning the display screen Gently wipe the screen with a soft, dry cloth. Caution: Do not use any liquids or powders on the phone. Using anything other than a soft, dry cloth can contaminate telephone components and cause premature failure. Telephone status indicators The IP Audio Conference Phone 2033 uses three bi-color LED lights, located around the speaker, to indicate the telephone status. The table lists the telephone state corresponding to the status indicator.
Chapter 1 Getting Started N0060623
Chapter 2 Basic call features This section describes the basic call features of the IP Audio Conference Phone 2033. For detailed information on telephone features and how to use them, refer to the BCM Telephone Feature User Guide. Basic call features There are many ways to make a call depending on your telephone programming and the type of call. External calls 1 Lift the handset. 2 Enter the external code (or line pool code) to access an external line. 3 Dial the external telephone number.
Chapter 2 Basic call features Contact your system administrator for a list of extension numbers. Answering calls Lift the handset to answer a call when your telephone rings and the light flashes. Hold ( or Hold ) 1 While on a call, press 2 To retrieve a held call, press or Hold . or Hold again. Make or answer a second call You can have two calls active at the same time. Use or Hold to switch between calls.
Chapter 2 Basic call features 13 Navigation buttons Use the Navigation buttons to scroll through or make changes to your call log. Call Log displays use the following special characters: 1 (underline) identifies a new item ¯ identifies answered calls § identifies long distance calls / identifies that the information has been shortened To view your Call Log: 1 Press Feature °⁄¤. 2 Press and to move through your items. Press OLD or • to view old items. Press NEW or £to view new items.
Chapter 2 Basic call features N0060623
