User Guide

Connecting the components

Figure 5: Remove the stand cover

2. Connect the AC power adapter (optional). Connect the adapter to the

AC adapter jack in the bottom of the phone. Form a small bend in the

cable, and then thread the adapter cord through the channels in the

stand.

Note 1: Your IP Phone 1140E supports both AC power and Power

over Ethernet options, including IEEE 802.3af standard power. To use

local AC power, the optional AC adapter can be ordered separately.

To use Power over Ethernet, where power is delivered over the CAT-5

WARNING

Use your IP Phone 1140E with the approved Nortel AC

Adapter (model #N0089601) for this model of phone

only.

Tilt Lever

Button

Center

Catch

Handset

cord exit