User manual

System Parameters Customization
44 Administrator Guide
ALWCLRNOTIFY
0 This parameter contains the
policy that defines ISAKMP
NOTIFICATION messages.
These message can be in the
clear or encrypted. If this value is
0, any notification sent in the clear
should be ignored by ISAKNMP.
FAILOVERDELAYON
HOOK
300 This parameter contains the
policy that defines the duration in
seconds the VPNremote Phone
attempts to re-establish a tunnel
with the currently connected
security device. This value, in
seconds, must be set before
VPNremote Phone attempts to
connect to a different security
device if the VPNremote Phone is
in ON hook.
FAILOVERDELAYOF
FHOOK
This parameter contains the
policy that defines the duration in
seconds the VPNremote Phone
attempts to re-establish a tunnel
with the currently connected
security device. This value, in
seconds, must be set before
VPNremote Phone attempts to
connect to a different security
device if the VPNremote Phone is
in OFF hook.
ACTIVATEVPN 0 This value is ignored if
NVVPNMode is set to 1 or 0.
If the value is set to 1, the VPN
tunnel setup procedure is invoked
prior to starting the system
specific procedures.
ALWSTOPVPN 0 This value contains the policy that
defines if user is allowed to stop
VPN while connected to the call
server. If this value is 1, the user
is allowed to stop the VPN
connection.
Table 5: VPNremote for 4600 Series IP Telephones Customizable System
Parameters (continued)
Parameter Name Default
Value
Description and Value Range Example
14 of 15