Multifunction Switch User Guide

Chapter 4 X-Switch CLI & ATM Terminal Interface
52 Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide
4 The Switch Main Menu displays:
Switch Main Menu
----------------------------------
Select an Agent to configure:
<CR> Refresh the screen
0. Return to Previous Menu
1. Direct Access to specific module
2. M-SPX in slot: 15
manages modules: 3,4,5,7,9,10,11
>>>Enter your choice
When you choose Option 1 and enter the M-ACC slot number, you reach the
M-ACC’s Setup Main Menu.
Module Setup Main Menu
Setup Main Menu
M-ACCF S/W Version: 4.2.2 Slot #: 5
<CR> Refresh the screen
0. Return to Previous Menu
-----------------------------------
1. Reset the Module
2. Software Download …
3. Set Primary Version …
4. Set Factory Defaults
5. Create Report
6. Clear Mac Address Table
7. Configuration Copy
8. ATM IP Configuration …
>>>Enter your choice:
The module Setup Main Menu lists the various categories of M-ACC configurable
parameters. You have the 8 options listed above.
Reset the Module
Before exiting a Setup session, select Option 1. ‘Reset the Module’ from the Setup
Main Menu if you wish the parameter changes you made to take effect. You will be
asked to confirm the reset before it is executed.