User Guide

Software installation
Nortel Mobile Communication Client 3100 for Nokia User Guide 23
select a different load. For more information, see “Language support”
on page 11.
The following procedure details the steps required to initially install the
MCC 3100 for Nokia software over the air.
Installing the MCC 3100 for Nokia software (new install) over the air
1. On your Nokia device, if the MCC 3100 for Nokia is running, select
Quit.
2. Press the Menu key.
The Menu screen appears.
3. On the Menu screen, select Web.
4. Use the following address format to access the user portal Web page:
http://<hostname | IP address>:8080/m
OR
https://<hostname | IP address>:8443/m
Note: Obtain the actual hostname or IP address and port settings
from your system administrator.
5. Do one of the following:
— To install the recommended software load, select the Installable
link.
— To select a different software load, select All other software for
your platform, scroll to a load, and select the Installable link.
6. After the prompt, MCC 3100_N.jad downloaded, select Open/Later,
then select Open.
7. Select Yes at the prompt to download and install the MCC 3100
application software.
8. At the prompt to download and install the software, select Yes.
Click here to view a multimedia presentation on
installation of the client (over the air) (www31.nortel.com/
webcast.cgi?id=7483)