User Guide

Software installation
26 NN42030-102 MC 3100 3.0 Standard 03.08 July 2009
20. Optionally, move the MCC 3100 for Nokia application icon to the
menu screen of your Nokia device. For more information, see
“Moving the MCC 3100 for Nokia icon to the menu screen” on
page 27
Upgrading the MCC 3100 for Nokia
software over the air
If you are performing an upgrade from a previous release (2.x), you must
perform an over the air initial installation (see “Installing the MCC 3100
for Nokia software over the air” on page 22) and then update the
MCG 3100 address on the Systems Settings screen if instructed to do so
by your system administrator.
The following procedure details the steps required to upgrade the
MCC 3100 for Nokia software over the air.
Upgrading the software over the air from your Nokia device
1. Start the MCC 3100 for Nokia and log on.
2. From any screen menu, select Options, Help.
3. Choose Options, Software Upgrade.
A web browser opens and the software download site displays.
4. Do one of the following:
— To install the recommended software load, select the Installable
link.
— To select a different software load, select All other software for
your platform, scroll to a load, and select the Installable link.
5. After the prompt, MCC 3100_N.jad downloaded, select Open/Later,
then select Open.
The Details screen appears.
6. Review the following details on the Details screen:
—Name
— Version
— Certificates