User Guide

MCC 3100 for Nokia configuration
Nortel Mobile Communication Client 3100 for Nokia User Guide 31
16. When prompted to allow the application to start when needed, select
Yes.
If logon is successful, the remainder of your configuration settings are
automatically downloaded from the MCG 3100 and you can begin
using the MCC 3100 for Nokia to place calls and send instant
messages.
Note: If you are using a GSM device, your service provider may
require you to program an Access Point Name (APN), username and
password on the device under Tools, Settings, Connection, Access
points.
Configuring the system settings
Use the System Settings screen to manage your connection to the
network. As a minimum, you must enter your user name, password,
MCC 3100 address, and Outgoing Call Service DN on this screen. For
more information, see “Initial configuration” on page 29.
Nortel recommends that the Outgoing Call Service DN includes the
international access code (+) and your country code as part of the
number to facilitate roaming. For example, [phone]. For more
information, see Figure 2 "Outgoing Call Service DN structure" on
page 31.
Figure 2: Outgoing Call Service DN structure
Consult your system administrator to obtain your Outgoing Call Service
DN and other system settings.