User Guide

MCC 3100 for Nokia configuration
Nortel Mobile Communication Client 3100 for Nokia User Guide 33
Secondary MCG3100
Address
Enter the IP address or the domain name and
port of the secondary MCG 3100:
Format:
<http | https>://<IP address | FQDN>:<port>
Note 1: If the default port (8080 for HTTP,
or 8443 for HTTPS) is in use, then only
the IP address or FQDN is required.
Note 2: You may need to use the FQDN
because of certificate requirements.
Voicemail DN/SIP
Address
Enter the number or SIP address to access
the voice mail server. This number enables
you to access your voice mail messages
directly from the Logs screen.
Outgoing Call
Service DN
Enter the call service directory number (DN)
for client calls. You can obtain this required
setting from your system administrator.
You can place calls directly from your wireless
device to other parties using the Direct
Outbound mode.
Note: To enable the Direct Outbound
mode, leave your caller ID visible on the
device.
Max No. of recent
(1 - x)
Specify the number of recent incoming and
outgoing calls that appear in the recent
preview pane of the MCC 3100 for Nokia. You
can choose from a range of 1 to x items,
where x is determined by your device’s screen
size. For example, if your device has a large
screen, the upper limit may appear as 10 or
more items. The default is 3 items.
Table 4: System Settings fields
Field Settings