User Guide

Advanced features
Nortel Mobile Communication Client 3100 for Nokia User Guide 49
Direct Outbound mode requires an Outgoing Call Service DN configured
in your MCC 3100 for Nokia settings. For more information, see
“Configuring the system settings” on page 31.
When the MCC 3100 for Nokia is configured for Direct Outbound mode,
you can switch from Direct Outbound mode to Call-me-First mode for
advanced calls. For more information, see “Advanced call” on page 50.
Call-me-First mode
In Call-me-First mode, your calls are completed in two steps. First the
enterprise telephony system calls you. After you answer, the enterprise
telephony system calls the other party. After the other party answers, you
are connected and can begin talking. For more information, see Figure 6
"Call-me-First mode" on page 49.
To use both call modes, you must configure an Outgoing Call Service DN
in your MCC 3100 system settings. For more information, see
“Configuring the system settings” on page 31.
Figure 6: Call-me-First mode
Calling a friend or contact
Place a call to a friend or contact directly from your Nokia device. Your
friend receives the call at their default contact location.
Placing a call to a friend or contact from your Nokia device