User Guide

Advanced features
82 NN42030-102 MC 3100 3.0 Standard 03.08 July 2009
If you selected Join Later when the instant conference started, you
receive periodic reminders to participate in the call. You can select Join
Now, Join Later, or Decline in response to these reminders. To configure
the reminder notification interval, see “Configuring your Call settings”
on page 38.
Managing an instant conference with the Dialpad
The instant conference initiator can execute a variety of functions using
the telephone dialpad. Instant conference participants have a limited set
of these functions available.
Note: Mid-call features such as Call Hold, Call Transfer and Call
Swap, are not available during instant conferences. The call handoff
features is available during instant conferences, but only to the
conference participants, not the conference originator.
Refer to the following table for a list of instant conference dialpad controls.
Table 11: Instant conference dialpad controls
Dialpad
control
Function Comments
** Starts the help
system
The help system plays a recorded
list of command descriptions. The
available functions depend on your
status as either an instant
conference initiator or participant.
*1 Terminates an
instant conference
The instant conference initiator
can terminate the call at any time
by pressing *1 and then confirming
the selection by pressing 1 a
second time.