User Guide

102
4. Tap the Line 1 tab located at the bottom section of the screen.
The Line 1 panel appears.
Your updated configuration settings are automatically downloaded
and you can begin to use the MCC 3100 for Windows Mobile Dual
Mode.
5. Configure the settings listed in Table 10 on page 102.
Table 10: Line 1 configuration fields (Part 1 of 2)
Address The SIP username of the line, which can be a
name such as John or an extension number
such as 2701. For example, enter 2701, not
[e-mail].
When the user places a call, the system adds
an @ symbol followed by the domain name to
create a complete SIP address.
For CS 1000, the SIP username must match
the Authentication ID.
Display Name The name that other users see on their
devices (if supported) when you engage in a
call or SIP message session (SMS).
Line Type Always “Private”.
Line Label The label that appears on the WiFi line button
in the Call Dialpad screen. The label is
restricted to a maximum of three alphanumeric
characters. The default label is P1.
Authentication:
ID
Your SIP authentication username (for
example, johnSmith).
For CS 1000, your SIP authentication
username must match the Authentication ID.
Authentication:
Password
Your SIP authentication user password (for
example, 95786).