User Guide

111
4. Tap Apply to accept your changes or Undo to start again.
Dialing Plan settings
Use the following procedure to configure Dialing Plan settings on the
MCC 3100 for Windows Mobile Dual Mode.
1. From any screen, select Tools > Settings.
The MCC 3100 for Windows Mobile Dual Mode screen appears.
2. Tap the Dialing Plan tab.
The Dialing Plan panel appears.
Enable WiFi Standby If you select this check box, the mobile device
enters standby mode whenever it is switches
off (for example, you press the Power button
or the activity timer expires). In standby mode,
the device backlight, touch and audio are off,
and the range of the WiFi radio reduces, but
the system remains active and the MCC 3100
for Windows Mobile Dual Mode can continue
to receive calls and messages.
If you clear this check box, the mobile device
power downs when it is switches off and the
MCC 3100 for Windows Mobile Dual Mode
cannot receive calls and messages.
Turn Off if WiFi
Unregistered for
If you select “Enable WiFi Standby”, you can
specify a timeout period of 1 to 120 minutes.
This causes the mobile device to turn off when
it is in standby mode and when you unregister
from the WiFi network for longer than the
period of time you specify.
If you clear this check box the device power
status is unaffected by the WiFi network
connection.
Table 14: Advance configuration fields (Part 5 of 5)