User Guide

Basic setup and use

• The device power state is on.

• The wireless LAN power save mode is Best Performance.

Configuring a display name

You configure a display name, which other users see instead of your SIP

address when you are in a WiFi communication session. You can also

program your display name on the Home screen. See “Adding a display

name (WiFi SIP only)” on page 54.

1. Tap Tools > Settings.

2. Tap the Line 1 tab.

3. In the Display Name field, enter a name, which displays to others

when you are in a WiFi communication session (if supported). Your

SIP address appears if you do not configure a display name.

4. Tap Apply to accept your changes or Undo to start again.

5. Tap OK to save the configuration.

Network roaming mode selection

Select one of the following network roaming modes:

• manual—you can manually log on to the available networks and

select a dialout network for outgoing calls and messages, either WiFi

or cellular.

• automatic—the MCC 3100 for Windows Mobile Dual Mode

automatically logs on to the available networks and selects a dialout