User Guide

Basic setup and use

network for outgoing calls and messages, either WiFi (default) or

cellular.

Selecting a roaming mode

Select Tools > Automatic Roaming or Manual Roaming.

The MCC 3100 for Windows Mobile Dual Mode switches to the roaming

mode you select.

The button lamp indicates your network status. If the WiFi signal strength

is too low, you cannot register to the Call Server. See Table 3 on page 44.

For more information about managing your network connections, see the

following sections:

• “Logging on a network manually” on page 59

• “Selecting a network while in manual roaming mode” on page 63

• “Monitoring a network while in automatic roaming mode” on page 64

IMPORTANT!

Before you select a network roaming mode, ensure that

the mobile device can connect to both the WiFi and

cellular networks. For instructions on establishing

network connections, see the documentation provided

with your mobile device.

Table 3: Network status

Button lamp Status

Green You are logged on to the network.

Yellow The network is available but you are not logged on.

Red The network is unavailable.

Orange Low WiFi signal strength. Log on prevented.