User's Manual

18 Fundamentals

Expected result: A normal cellular call occurs. This action ensures the

consistency of the native dialer on the Windows Mobile Dual Mode

phone and the communication server configuration.

•

Action: Make a call from the MCC 3100 for Windows Mobile Dual

Mode user – WiFi call.

Expected result: The call attempt uses SIP to communicate with the

SPS. The SPS uses source-based routing to send the call origination

attempt to the home call server of the user (the SIP gateway of the

call server where the PCA is configured) and the CS 1000 call server

places the call, based on the local dial plan configuration. Caller ID

for the call attempt is from the MARP TN of the MADN group and

presented appropriately to the called destination.

Installation requirements

You can install the MCC 3100 Administration Tool on any PC that meets

the hardware and software requirements described in this section.

Hardware

The MCC 3100 Administration Tool requires the following hardware:

•

Intel Pentium 4, 1 GHz or higher

•

512 MB RAM

•

5 MB hard drive space

Software

The MCC 3100 Administration Tool requires the following software:

•

Microsoft Windows XP Professional or Nortel CS 1000 R5 Linux Base

•

Java 2 Platform, Standard Edition, v 1.6.0 (J2SE 1.6.0)

System preparation

After the installation is complete, and before you can use the MCC 3100

Administration Tool, you must prepare your network and perform some

basic MCC 3100 configuration:

• Obtain the licenses file (license.txt) and copy the file to a secure

directory.

• Obtain the MCC 3100 application software and copy it to an FTP

server or Web site that the mobile clients can access from the Internet.

Nortel Mobile Communication 3100 Series Portfolio

Nortel Mobile Communication Client 3100 for Windows Mobile Dual Mode Administration

NN42030-601 02.01 Standard

9 May 2008