User's Manual

ManualsBrandsAvaya ManualsMobile CommunicatorAvaya Mobile Communication Client 3100 for Windows Mobile Dual Mode

38 Administration Tool configuration

Table 7

Advanced configuration fields (cont’d.)

SIP Voice Mail

Enter the SIP address to access the enterprise

voice mail server.

The method used to access the mailbox varies

from one device to another. Possible methods

include:

• Tap and hold Mailbox key on Call

Dialpad

•

Tap and hold the 1 key on Call Dialpad

• Tap and hold the 1 key on device

keyboard (requires alpha-to-digit

mapping)

Enable WiFi

Standby

If you select the Enable WiFi Standby check

box, the mobile device enters standby mode

whenever it is switched off (the Power button

pressed or the activity timer expires). In standby

mode, backlight, touch and audio are off, and

the range of the WiFi radio is reduced, but the

system remains active and the MCC application

can still receive calls and messages.

If you clear the Enable WiFi Standby check

box, the mobile device powers down when it is

switched off and the MCC application cannot

receive calls and messages.

Turn Off if WiFi

Unregistered for

If Enable WiFi Standby is enabled, you can

select this check box and specify a timeout

period of 1 to 120 minutes. This causes the

mobile device to turn off when it is in standby

mode and you unregister from the WiFi network

for a period of time greater than you specify.

If you clear this check box, the power status of

the device is not affected by the WiFi network

connection.

8 On the System Profile page, click the Dialing Plan tab,

and configure the parameters listed in Table 8 "Dialing Plan

configuration fields" (page 39).

Nortel Mobile Communication 3100 Series Portfolio

Nortel Mobile Communication Client 3100 for Windows Mobile Dual Mode Administration

NN42030-601 02.01 Standard

9 May 2008