User's Manual

Single user profile deployment 45
Table 14
Lines configuration fields
Address
The SIP username, which is typically an
extension number such as 2701. Only the
username portion of the address is required, not
the full SIP URI. For example, enter 2701, not
[e-mail]. After a user places a call,
the system adds an @ followed by the domain
name to create a complete SIP address.
ATTENTION
To register to a CS 1000 SPS, the SIP
username must match the SPS User Endpoint
username configured on the SPS.
Display Name
The name that other users see on their devices
(if supported) when the user is engaged in a call
or SIP message session (SMS).
Line Label
The label that appears on the WiFi line button in
the Call Dialpad screen. The label is restricted
to a maximum of three alphanumeric characters.
The default label is P1.
Authentication:
ID
The user’s SIP authentication username (for
example, johnSmith).
ATTENTION
To register to a CS 1000 SPS, the SIP
authentication username must match the SPS
User Endpoint username configured on the
SPS.
Authentication :
Password
The user’s SIP authentication user password (for
example, 95786).
Call Forward
Always
To forward all incoming WiFi calls to the specified
number, enable this check box.
Nortel Mobile Communication 3100 Series Portfolio
Nortel Mobile Communication Client 3100 for Windows Mobile Dual Mode Administration
NN42030-601 02.01 Standard
9 May 2008
Copyright © 2007, 2008 Nortel Networks
.