User's Manual

48 User profile management

Table 15

Bulk user profile data columns (cont’d.)

Address

Enter the user’s SIP username, which is typically an

extension such as 2701.

ATTENTION

To register to a CS 1000 SPS, the SIP username

must match the SPS User Endpoint username

configured on the SPS.

Display Name

Enter the name that other users will see on

their devices (if supported) during calls or SMS

sessions..

Line Label

Create the label that appears on the WiFi line

button in the Call Dialpad screen. The label is

restricted to a maximum of three alpha-numeric

characters.

The default label is P1.

Line ID

Enter the ID (username) for SIP authentication.

Example: johnsmith

ATTENTION

To register to a CS 1000 SPS, the SIP

authentication username must match the SPS

User Endpoint username configured on the SPS.

Password

Enter the password for SIP authentication.

Example: 95786

ATTENTION

Although some columns, such as Address and Display Name, do

not appear on the Administration Tool interface, you must configure

them in the .CSV file.

2 Save the file in .CSV format to a location that you can access

with the Administration Tool.

3 Start the Administration Tool.

4 Select the Bulk Deployment tab.

5 Click Browse.

6 Locate the .CSV file, and click Open.

In a correctly configured CSV file, the user-specific data

populates the Bulk Deployment list.

Nortel Mobile Communication 3100 Series Portfolio

Nortel Mobile Communication Client 3100 for Windows Mobile Dual Mode Administration

NN42030-601 02.01 Standard

9 May 2008