User's Manual

Nortel Mobile Communication Client 3100 for Windows Mobile 57

Figure 9

CS 1000 Coordinated Dialing Plan deployment example

Table 16 "LD 87 TSC configuration" (page 57) describes the commands

that you use to configure the trunk steering code (TSC).

Table 16

LD 87 TSC configuration

Prompt Command Description

REQ NEW Request to create a new entity.

FEAT CDP Enter the CDP feature.

TYPE TSC Enter the TSC type.

TSC <trunk steering

code>

Enter the special prefix as the trunk steering

code (for example, 99999).

Other

Prompts

[RETURN] Press the RETURN key to skip other

prompts.

RLI <route list#> Enter the route list number that is configured

for the SIP trunk.

Other

Prompts

[RETURN] Press the RETURN key to skip other

prompts.

E.164 international format numbers

Calls to E.164 fully qualified international format numbers are handled by

the SIP Gateway and arrive with a request URI in the SIP INVITE for the

following call:

sip: +CCCXXXXXXXX@domain; user=phone

Nortel Mobile Communication 3100 Series Portfolio

Nortel Mobile Communication Client 3100 for Windows Mobile Dual Mode Administration

NN42030-601 02.01 Standard

9 May 2008