User's Manual

58 Communication Server 1000

To support these calls, you must configure the parameters CNTC, NATC,

and INTC in LD 15. These parameters ensure that fully qualified numbers

within the same country are dialed as national numbers by stripping the

country code and adding the national dial prefix.

Example 1 outside of North America

AC1=0, CNTC=31, NATC=0, INTC=00

The URI incoming for the SIP INVITE for the call is:

sip:+31123456789@domain.com;user=phone

The digits sent on the outgoing trunk are: 0123456789

Example 2 within North America

AC1=8, CNTC=1, NATC=1, INTC=011

The URI incoming for the SIP INVITE for the call is:

sip: +12125551212@domain.com;user=phone

The digits sent on the outgoing trunk are: 812125551212

Trunking parameter configuration

You must configure the CS 1000 SIP trunk that receives MCC 3100 for

Windows Mobile Dual Mode calls to ESN5. You must also configure all

associated Virtual trunks to WNK/WNK. These parameters are required so

that MCC calls to the Public Network display the correct CLID and have

the same Network Class of Service (NCOS) as a call from the associated

CS 1000 telephone.

The Virtual trunk is WNK/WNK if the output from Element Manager, or a

terminal window, is:

DES IPTIE

TN 081 0 00 02 VIRTUAL

TYPE IPTI

CDEN 8D

CUST 0

XTRK VTRK

ZONE 000

TRK ANLG

NCOS 0

RTMB 10 3

CHID 3 TGAR 0

STRI/STRO WNK WNK

SUPN YES

Nortel Mobile Communication 3100 Series Portfolio

Nortel Mobile Communication Client 3100 for Windows Mobile Dual Mode Administration

NN42030-601 02.01 Standard

9 May 2008