User's Manual

Nortel Mobile Communication Client 3100 for Windows Mobile 59

AST NO

IAPG 0 *

CLS UNR DIP WTA LPR APN THFD XREP

P10 NTC MID

TKID *

AACR NO

ATTENTION

You must configure all of the SIP Virtual Trunks to WNK WNK.

The Route Data Block is ESN5 if the output from Element Manager, or a

terminal window, is:

TYPE RDB

CUST 00

DMOD

ROUT 10

DES IPROUTE

TKTP TIE

...

VTRK YES

ZONE 100

PCID SIP

...

ANTK

SIGO ESN5

STYP SDAT

ATTENTION

If the Route Data Block (RDB) already has associated Virtual Trunks and is

configured to SIGO STD, you must remove all Virtual Trunks before you can

change the RDB to ESN5.

Enable transfer between trunks

To support transfer from the Nortel Mobile Communication Client 3100

(SIP REFER), you must enable transfer between SIP trunks. For more

information, see Procedure 15 “Enabling transfer between SIP trunks”

(page 59).

Procedure 15

Enabling transfer between SIP trunks

Step Action

1 Disable DCH (LD 32).

DIS VTRM <customer#> <route#>

Nortel Mobile Communication 3100 Series Portfolio

Nortel Mobile Communication Client 3100 for Windows Mobile Dual Mode Administration

NN42030-601 02.01 Standard

9 May 2008