Configuration manual

Avaya MultiSite Administration Configuration 25
Setting Up MultiSite Administration
Starting the Queue
You must start the queue before you can use MultiSite Administration to access
or make changes to that voice system.
* Note: The queue will be started already if you set MultiSite Administration
to perform an automatic initialization.
To manually start the queue, complete the following steps:
1. From the main screen, click the MSA Manager tab, if it is not already
displayed.
2. Click System Resources.
3. Click Start Queue.
4. Click OK.
Initializing Voice Systems
You must initialize each voice system that you want to use with MultiSite
Administration before you use MultiSite Administration to access or make
changes to that system.
* Note: The voice system will be initialized already if you set MultiSite
Administration to perform an automatic initialization.
To manually initialize a voice system in MultiSite Administration, complete the
following steps:
1. From the main screen, click the MSA Manager tab, if it is not already
displayed.
2. Click System Resources.
3. Click Initialize System.
4. Click OK.