Administrator's Guide
Screen reference
555-233-5061028 Issue 5 October 2002
Code Calling Playing Cycles
This field sets the number of times a chime code will play when a user makes a
chime page. To determine the best setting, consider who your code calling users
are and whether they are likely to hear the code chime the first time.
Code Calling — TAC
This field assigns a Trunk Access Code (TAC) to a paging zone. Users dial this
code to make a page to a specific zone. One TAC must be assigned to each zone
you want to use. Two zones cannot have the same TAC. If you enter a TAC in the
ALL field, users may activate speakers in all the zones by dialing that code.
Code Calling — TN
Valid entries Usage
1
to 3 Enter the number of times you want the chime code to play
when a user makes a page.
blank The field may not be blank when you administer chime
paging (code calling).
Valid entries Usage
1- to 4-digits Enter a Trunk Access Code (TAC) allowed by your dial plan.
*
May be used as first digit.
#
May be used as first digit.
blank Leave this field blank for unused paging zones.
Valid entries Usage
1
to 20
(DEFINITY SI,
CSI)
If your system uses Tenant Partitioning, you may use
this field to assign a paging zone to a specific tenant
partition.
1 to 100
(DEFINITY R,
S8300 Media
Server, S8700
IP-Connect, S8700
Multi-Connect)