Administrator's Guide

Screen reference
555-233-5061030 Issue 5 October 2002
Voice Paging — COR
This field assigns a Class of Restriction to a paging zone.
Voice Paging — TAC
This field assigns a Trunk Access Code (TAC) to a paging zone. Users dial this
code to make a page to a specific zone. One TAC must be assigned to each zone
you want to use. Two zones cannot have the same TAC. If you enter a TAC in the
ALL field, users may activate speakers in all the zones by dialing that code.
Voice Paging Timeout (sec)
This field limits the duration of voice pages. When this interval ends, calls are
disconnected. To determine the best setting, time the typical pages you expect to
broadcast and then add another 4 to 5 seconds.
NOTE:
To use a port that has no hardware associated with it, place an ‘X’ in this
field.
Valid entries Usage
0
through 95. You can assign different classes of restriction to different
zones.
blank Leave this field blank for unused paging zones.
Valid entries Usage
1- to 4-digits Enter a Trunk Access Code (TAC) allowed by your dial plan.
*
May be used as first digit.
#
May be used as first digit.
blank Leave this field blank for unused paging zones.
Valid entries Usage
10
to 600
seconds.
Enter the maximum number of seconds you want any page to
last.
blank The field may not be blank when you administer voice
paging.