Administrator's Guide

Multifrequency-Signaling-Related System Parameters
Issue 5 October 2002 1053555-233-506
Transmitted Signal Gain (dB)
Use COR for All Group II Responses
Appears if the Outgoing Call Type field is group-ii-mfc.
Use COR for Calling Party Category
Appears when the Outgoing Call Type field is group-ii-mfc and the Use COR for
All Group II Responses field is
n. Indicates the category to send with ANI if
requested on an outgoing R2-MFC call.
NEXT ANI DIGIT
Incoming
Appears when the Incoming Call Type field is group-ii-mfc and the Outgoing
Call Type field is
group-ii-mfc or mfe.
Valid
entries Usage
-15
to 3 Enter the number for the loss/gain when the trunk port listens
to the MFC port. The MFC port generates at -5 for MFC and -8
for MFE, and this field adds gain or loss to the starting value of
-5.
Valid entries Usage
y/n
Enter y to allow the COR administered category to be used
for both the calling party and called party categories.
Valid entries Usage
y
Use the calling facility’s COR to determine category.
n Use the calling party’s user-type COR to determine
category.
Valid entries Usage
next-digit
next_ani_digit
send-ani
Enter a value to determine whether the Next ANI Digit
signal will be the same as the “send-ani” signal or the
“next-digit” signal or another signal defined as “next_ani_
digit.”