Administrator's Guide

Screen reference
555-233-5061058 Issue 5 October 2002
Field descriptions for page 3
The fields shown on Page 3 of the Multifrequency-Signaling-Related System
Parameters screen define the meaning of MFC tones for calls originated at the
CO. See ‘‘Definitions of Group I, II, A, and B signals’’ on page 1063 for more
information. This screen appears only if the Incoming Call Type field is
group-ii-mfc or non-group-ii-mfc.
When the screen initially appears, either of two sets of default values is possible.
One set is for the group II call type; the other set is for non-group II call type. In
each set, the default value for each field is set to the most common value.
Screen 238 shows the defaults when the Incoming Call Type field is
group-ii-mfc.
A variation appears if Incoming Call Type is
non-group-ii-mfc. When Incoming
Call Type is
non-group-ii-mfc, group II and group B columns do not appear.
Screen 238. Multifrequency-Signaling-Related System Parameters screen
change system-parameters multifrequency-signaling Page 3 of 4
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
INCOMING FORWARD SIGNAL TYPES INCOMING BACKWARD SIGNAL TYPES
(Tones from CO) (Tones to CO)
Group-I Group-II Group-A Group-B
11: ignored 1: normal 1: next-digit 1: free
12: ignored 2: normal 3: end-of-dial 2: busy
13: ignored 3. normal __: 4: congestion
14: ignored 4: normal __: ________________ 7: intercept
15: ignored 5: normal __: ________________ __: __________
6: normal __: ________________ __: __________
7: normal __: ________________ __: __________
8: normal __: ________________ __: __________
9: normal __: ________________ __: __________
10: normal __: ________________ __: __________
11: normal __: ________________ __: __________
12: normal __: ________________ __: __________
13: normal __: ________________ __: __________
14: normal __: ________________ __: __________
15: normal __: ________________ __: __________