Administrator's Guide

Screen reference
555-233-5061084 Issue 5 October 2002
WIDEBAND SUPPORT OPTIONS
Contiguous
Specifies whether to hunt contiguous NXDS0 channels. This field only appears if
y is entered in NXDS0. The hunt algorithm to satisfy an NXDS0 call is as follows:
H0
H11
Valid entries Usage
y/n
Enter y to specify the “floating” scheme. NXDS0 calls are
placed on a contiguous group of B-channels large enough to
satisfy the requested bandwidth without constraint on the
starting channel (no fixed starting point trunk).
n
Enter n to specify the “flexible” scheme. NXDS0 calls are
placed on any set of B-channels on the same facility as long
as the requested bandwidth is satisfied. There are no
constraints, such as contiguity of B-channels or fixed starting
points.
Valid entries Usage
y/n
Enter y to specify the ISDN information transfer rate for 384
Kbps of data, which is comprised of six B-channels. When a
PRI Endpoint is administered to support H0, the hunt
algorithm to satisfy a call requiring 384 Kbps of bandwidth
uses a fixed allocation scheme.
Valid entries Usage
y/n
Enter y to specify the ISDN information transfer rate for 1536
Kbps of data, which is comprised of 24 B-channels. When a
PRI Endpoint is administered to support H11, the hunt
algorithm to satisfy a call requiring 1536 Kbps of bandwidth
uses a fixed allocation scheme.