Administrator's Guide

Screen reference

555-233-5061096 Issue 5 October 2002

Pattern Choices

There are 12 pattern choices for DEFINITY R, CSI, SI, S8100 Media Server with

a G600, and S8100 Media Server with a CMC1; there are 24 pattern choices for

the S8300 Media Server, S8700 IP-Connect, and S8700 Multi-Connect. Enter the

route pattern number you want associated with each code. The pattern choice you

list on one screen automatically defaults to the other screens of the same table. If

you use one pattern for most of the codes, assign that pattern to choice 1.

RHNPA TABLE

Display-only field indicating the table number.

Route Pattern

The Route Pattern screen defines the route patterns used by your switch. Each

route pattern contains a list of trunk groups that can be used to route the call. The

maximum number of route patterns and trunk groups allowed depends on the

configuration and memory available in your system.

Use this screen to insert or delete digits so AAR or ARS calls route over different

trunk groups. You can convert an AAR number into an international number, and

insert an area code in an AAR number to convert an on-network number to a

public network number. Also, when a call directly accesses a local central office

(CO), if the long-distance carrier provided by your CO is not available, your

switch can insert the dial access code for an alternative carrier into the digit string.

Valid

entries Usage

1-640

blank

For DEFINITY R, S8100 Media Server with a G600, and

S8100 Media Server with a CMC1.

1-999 or

blank

For S8300 Media Server, S8700 IP-Connect, and S8700

Multi-Connect

1-254

For DEFINITY SI and CSI.