Administrator's Guide

Screen reference
555-233-5061098 Issue 5 October 2002
The following table explains BCC values:
BCIE (Bearer Capability Information Element)
Use BCIE to determine how to create the ITC codepoint in the setup message.
This field applies to ISDN trunks and appears if ITC is
both.
CA-TSC Request
Use CA-TSC on ISDN B-channel connections.
DCS/QSIG Intw
This field only appears if the Interworking with DCS field on the
System-Parameters Customer-Options screen is set to
y.
BCC Value Description
0 Voice-Grade Data and Voice
1 56-kbps Data (Mode 1)
2 64-kbps Data (Mode 2)
3 64-kbps Data (Mode 3)
4 64-kbps Data (Mode 0)
W 128 to 1984-kbps Data (Wideband)
Valid entries Usage
ept
(endpoint)
unr (unrestricted)
Valid
entries Usage
as-needed
The CA-TSC is set up only when needed. This causes a slight
delay. Avaya recommends this entry for most situations.
at-setup
The CA-TSC is automatically set up for every B-channel call
whether or not it is needed.
none
No CA-TSC is set up. Permits tandeming of NCA-TSC setup
requests0.
Valid entries Usage
y/n
Enter y to enable DCS/QSIG Interworking.