Administrator's Guide

Adding an IP Telephone
Issue 5 October 2002 111555-233-506
Before you start
Verify the system has a:
■ TN2302 IP Media Processor circuit pack for audio capability
■ TN799 Control-LAN circuit pack for signaling capability (for Servers R,
CSI, and SI only)
Be sure that your system has been enabled to use IP Telephones. Display the
System-Parameters Customer-Options screen and verify the following field
settings:
■ Maximum Concurrently Registered IP Stations is greater than 0
■ IP Stations field is y
■ Information has been entered in the fields on the Maximum IP
Registrations by Product ID page
Instructions for adding an IP Telephone
Let us add an IP telephone at extension 4005.
To assign an extension, complete the following steps:
1. Type
add station 4005 and press RETURN.
The Station screen appears.
In the Type field, type
4620.
2. The Port field is display-only, and
IP appears.
STATION
Extension: 2345
Lock Messages? n BCC: _
Type: 4620+
Security Code: _________ TN: 1_
Port: IP Coverage Path 1: ____ COR: 1
Name: _____________________ Coverage Path 2: ____ COS: 1
Hunt-to Station: _____
STATION OPTIONS
Loss Group: none
Personalized Ringing Pattern: 1
Message Lamp Ext: 2345
Speakerphone: 2-way Mute Button Enabled? y
Display Language: english Expansion Module? y
MM Complex Data Ext:
IP SoftPhone? n