Administrator's Guide

Screen reference
555-233-5061116 Issue 5 October 2002
Trunk Group for Channel Selection
X-Mobility/Wireless Type
Appears when the Group Type field is isdn-pri. This field indicates the type of
X-Mobile endpoints allowed.
Supplementary Service Protocol
Valid
entries Usage
1-666
or
blank
Enter the trunk group number. If there is more than one trunk
group assigned to this signaling group, the group entered in
this field will be the one that can accept incoming calls. For
DEFINITY R.
1-99 or
blank
For DEFINITY SI only.
1-2000 For S8300 Media Server, S8700 IP-Connect, S8700
Multi-Connect.
Valid
entries Usage
DECT
Indicates to the switch that the remote end of the trunk group
controlled by the signaling group is a DECT mobility
controller. This allows X-Mobility to work over ISDN-PRI
trunks between the switch and adjunct.
NONE
Valid
entries Usage
a
AT&T, Bellcore, Nortel.
When the Country Code field on the DS1 screen is 1A, SSA
selects AT&T custom supplementary services.
When the Country Code field on the DS1 screen is 1B, SSA
selects Bellcore Supplementary Services.
When the Country Code field on the DS1 screen is 1C, SSA
selects Nortel Proprietary Supplementary Services.
b
ISO QSIG
c
ETSI
d
ECMA QSIG