Administrator's Guide

Station
Issue 5 October 2002 1133555-233-506
Automatic Moves
Automatic Moves allows a phone to be unplugged from one location and moved
to a new location without additional switch administration. The switch
automatically associates the extension to the new port.
!
CAUTION:
When a phone is unplugged and moved to another physical location, the
Emergency Location Extension field must be changed for that extension or
the USA Automatic Location Identification data base must be manually
updated. If the Emergency Location Extension field is not changed or if the
USA Automatic Location Identification data base is not updated, the DID
number sent to the Public Safety Network could send emergency response
personnel to the wrong location.
Auto Select Any Idle Appearance
Valid entries Usage
always Enter always and the phone can be moved anytime without
additional administration by unplugging from one location and
plugging into a new location.
once Enter once and the phone can be unplugged and plugged into a
new location once. After a move, the switch sets the field to
done the next time routine maintenance runs on the phone.
Use once when moving a large number of phones so each
extension is removed from the move list. Use once to prevent
automatic maintenance replacement.
no Enter no to require administration in order to move the phone.
done Done is a display-only value. The switch sets the field to done
after the phone is moved and routine maintenance runs on the
phone.
error Error is a display-only value. The switch sets the field to error,
after routine maintenance runs on the phone, when a
non-serialized phone is set as a movable phone.
Valid entries Usage
y/n
Enter y to allow automatic selection of any idle appearance
for transferred or conferenced calls. The system first attempts
to find an idle appearance of the call being transferred or
conferenced. If that attempt fails, the system selects the first
idle appearance.