Administrator's Guide

Screen reference
555-233-5061134 Issue 5 October 2002
Automatic Selection of DID Numbers
The switch chooses a 2- to 5-digit extension from a predetermined list of numbers
and assigns the extension to a hotel room phone.
BCC
Appears when ISDN-PRI or ISDN-BRI Trunks is enabled on the
System-Parameters Customer-Options screen. Display-only field set to
0 for
stations (that is, indicates voice or voice-grade data).
See ‘‘Generalized route selection’’ on page 1687 for a detailed description of
Bearer Capability Classes (BCC) and their ability to provide specialized routing
for various types of voice and data calls. The BCC value is used to determine
compatibility when non-ISDN facilities are connected to ISDN facilities (ISDN
Interworking).
Bridged Call Alerting
If Bridged Call Alerting is n and Per Button Ring Control is n, audible ringing is
suppressed for incoming calls on bridged appearances of another phone’s primary
extension.
Building
Enter a valid building location. See ‘‘Signaling Group screen (page 2)’’ on page
1123 for valid entries.
Busy Auto Callback Without Flash
Appears only if, on the Feature-Related System Parameters screen, the Without
Flash field is
y. This field then defaults to y for all analog phones that allow
Analog Automatic Callback.
Valid entries Usage
y/n
Enter y to use the Automatic Selection of DID Numbers for
Guest Rooms feature.
Valid entries Usage
y/n
Enter y to enable audible ringing for TEG, PCOL, bridged
appearances, or Data Extension calls.
Valid entries Usage
y/n
Enter y to provide automatic callback for a calling analog station
without flashing the hook.