Administrator's Guide

Station
Issue 5 October 2002 1135555-233-506
Button Assignments
Enter the abbreviated software name to assign a feature button. For a list of
feature buttons, see ‘‘Telephone feature buttons’’ on page 131.
NOTE:
If you want to use Terminal Translation Initialization (TTI), you must assign
a call appearance (call-appr) to the first button position. TTI needs the
button on the first call appearance to get dial tone.
Cable
You can use this field to identify the cable that connects the phone jack to the
system. You also can enter this information in the Blank column on the Port
Assignment Record.
Caller ID Message Waiting Indication
Appears when the Type field is CallrID. For CallrID type phones or analog phones
with Caller ID adjuncts only.
NOTE:
The Caller ID Message Waiting Indication administration is independent of
the administration of LED or NEON lamp Avaya MultiVantage Message
Waiting Indication (MWI). For example, it is possible to administer a Caller
ID phone with the Caller ID Message Waiting Indication field set to
n and
the Message Waiting Indicator field set to
neon.
Calls Allowed
Appears if the XMOBILE Type field is
EC500 and the Mapping Mode field is
termination or both. Used to identify the EC500 call filter type for an XMOBILE
station. This field allows an XMOBILE station to function as a bridge and still be
restricted.
Valid entries Usage
y/n
Enter y to allow aliasing of various non-Avaya phones and
adjuncts.
Valid entries Usage
internal
External calls are blocked. Internal calls terminate to the
XMOBILE station. Attendant-originated and attendant-delivered
calls are not delivered