Administrator's Guide

Screen reference
555-233-5061144 Issue 5 October 2002
Extension
Displays the extension for this station—this is either the extension you specified
in the station command or the next available extension (if you used add station
next).
For a virtual extension, enter a valid physical extension or a blank. Blank allows
an incoming call to the virtual extension to be redirected to the virtual extension’s
“busy” or “all” coverage path.
Avaya recommends that you consider the display for emergency
notification when you complete the name field on the station screen. Put
the most important identifying information at the beginning of the field.
When an emergency call is made and a crisis alert station with a
27-character display is notified, only 17 characters of the name field appear
on the first display line, followed by the extension. The second line
contains the last 3 characters of the name field, followed by the word
“EMERGENCY.” Characters 18 through 24 of the name field do not
appear at all.
Feature Module
Enter y to indicate the station is connected to a feature module. Entering y
displays an additional page to allow you to assign feature buttons to the module.
Fixed TEI
This field appears only for ISDN-BRI data modules and ASAI links. It indicates
that the endpoint has a fixed Terminal Endpoint Identifier (TEI).
The TEI identifies a unique access point within a service. You must administer
TEIs for fixed TEI terminals. However, for terminals with the automatic TEI
capability, the system dynamically assigns the TEI.
Floor
Enter a valid floor location. See ‘‘Translation-ID Number Mismatch Interval
(days)’’ on page 1112 for valid entries.
Valid entries Usage
y/n
Entering y displays the TEI field.
For ASAI, enter
y.