Administrator's Guide

Station
Issue 5 October 2002 1149555-233-506
LWC Activation
LWC Log External Calls
Appears only where the LWC Reception field is available. When an external call
is not answered, the switch keeps a record of up to 15 calls (provided information
on the caller identification is available) and the phone’s message lamp lights. The
phone set displays the names and numbers of unsuccessful callers.
LWC Reception
Mapping Mode
Controls the mode of operation in which the cell phone will operate when mapped
to this XMOBILE extension. An XMOBILE station can be bridged to a deskset.
These restrictions/modes exist because the COR of a bridge is ignored; instead the
principal’s COR is used. This field allows an XMOBILE station to function as a
bridge and still be restricted.
Valid entries Usage
y/n
Enter y to allow internal telephone users to leave short LWC
messages for this extension.
If the system has hospitality, enter
y for guest-room
telephones if the extension designated to receive failed
wakeup messages should receive LWC messages that indicate
the wakeup calls failed.
Enter
y if LWC Reception is audix.
Valid entries Usage
y/n
Enter y to make unanswered external call logs available to
end-users. Each record consists of the latest call attempt date
and time.
Valid
entries Usage
audix
Enter audix if the messages are stored on the Audio Information
Exchange System.
none
msa-spe Enter msa-spe if LWC messages are stored in the system or on the
Messaging Server Adjunct - Switch Processor (for DEFINITY SI /
DEFINITY CSI).
spe
Enter spe if LWC messages are stored in the system or on the
Switch Processor (for DEFINITY R).