Administrator's Guide

Screen reference
555-233-5061152 Issue 5 October 2002
MIM Mtce/Mgt
Indicates if the telephone supports MIM Maintenance and Management
capabilities other then endpoint initialization. Appears only if MIM Support is
y.
MIM Support (Management Information
Message Support)
This field appears only for ISDN-BRI data modules and ASAI. This field supports
MIM endpoint initialization (SPID support) and other Maintenance or
Management capabilities.
Mobility Trunk Group
This field associates the XMOBILE station to a trunk.
Valid entries Usage
y
Enter y to display Endpt Init and MIM Mtce/Mgt.
n
Enter n for ASAI.
Valid entries Usage
1-x
(where x is 666)
for DEFINITY R
2000 for S8700 IP
Connect and S8700
Multi-Connect
99 for DEFINITY
CSI, S8300 Media
Server, and S8100
Media Server with a
CMS1
blank
Enter a valid trunk group number for mobility routing.
This trunk group is used for routing. The
Configuration Set field may be blank if the trunk group
is DECT or PHS. If the trunk group is non-DECT or
non-PHS, administer the Configuration Set field.
aar
The routing capabilities of the switch will be used to
direct the call to an ISDN trunk. If no ISDN trunk is
available, the call will not be extended out of the
switch. It will provide ringback to the calling company
and may eventually go to coverage.
ars
The routing capabilities of the switch will be used to
direct the call to an ISDN trunk. If no ISDN trunk is
available, the call will not be extended out of the
switch. It will provide ringback to the calling company
and may eventually go to coverage.