Administrator's Guide

Screen reference

555-233-5061156 Issue 5 October 2002

Port

Enter 7 characters to specify a port, or an x. If this extension is registered as an IP

endpoint, this field will display S00000.

For DCP sets, the port can only be assigned once. ISDN-BRI provides a

multipoint configuration capability that allows a previously assigned port

to be specified more than once as follows: 2 stand-alone voice endpoints, 2

stand-alone data endpoints, or 1 integrated voice and data endpoint.

However, for the following cases, the port is assumed to be fully assigned:

— Maximum number of users (currently 2) are assigned on the port.

— One of the users on the port is a fixed TEI station.

— One of the users on the port has B-channel voice and B-channel data

capability.

— One of the users on the port has no SPID assigned, which includes

telephones that have no SPID initialization capability.

— This field is display-only for H.323 set types and 4600 set types.

The system assigns an “IP” when the station is first administered.

Valid entries Usage

through 44

(DEFINITY R)

First and second numbers are the cabinet number

01 through 03

(DEFINITY SI)

A through E Third character is the carrier

01 through 20 Fourth and fifth characters are the slot number

01 through 32 Sixth and seventh characters are the circuit number

Indicates that there is no hardware associated with the

port assignment. Use for AWOH and CTI stations.

Automatically entered for IP phones.